Hydrodynamic performance of a T-shaped floating breakwater     

《Applied Ocean Research》2019

The comprehensive utilization of floating breakwaters, specially acting as a supporting structure for offshore marine renewable energy explorations, has received more and more attention recently. Based on linear water-wave theory, the hydrodynamic performance of a T-shaped floating breakwater is semi-analytically investigated through the matched eigenfunction expansion method (MEEM). Auxiliary functions, to speed up the convergence and improve the accuracy in the numerical computations, are introduced to represent the singular behavior of fluid field near the lower salient corners of the structure. The effects of the height and installation position of the vertical screen on the reflection and transmission coefficients, dynamic response and wave forces are examined. It is found that the presence of the screen shifts the resonance frequency of RAO for both surge and pitch modes to the low-frequency area, while has no effect on heave mode. The identical added masses, damping and transmission coefficients can be obtained in the cases where the screen holds the same distance away from the longitudinal central axis of the upper box-type structure. Moreover, a relatively small pitch response can be achieved in a wide wave–frequency range, when the breakwater is Γ-shaped.  相似文献   

基于改进的向后-向前选择法粗差定位与估值算法     

柴双武  杨晓琴 《大地测量与地球动力学》2019,39(5):538-543

对传统的向后-向前选择法粗差定位方法进行改进，即在原有基础上加入对平差模型的整体检验，计算统计量的相关系数，通过对偏相关系数的检验来定位统计量相关的粗差观测值。通过模拟粗差算例证明，该算法能够准确定位多维粗差，有效改善粗差定位转移的现象，且粗差估值结果比较可靠。  相似文献   

尼日尔三角洲东部深水区构造特征及其形成机理     

赵江  王秋良  卢圣力  付博  杜峰 《大地测量与地球动力学》2019,39(7):691-695

研究尼日尔三角洲东部深水区块发现，整个盆地从陆向洋具有3个大的构造分区：伸展拉张区、过渡区和挤压逆冲区。伸展区以大型同沉积断层伴生大量滚动背斜构造为特征，过渡区发育大量泥底辟构造，挤压区以复杂的逆冲叠瓦构造为主。通过分析形成机理，揭示东部深水转换带上M研究区构造特征，按构造的演化特征将该区构造分为泥底辟型、冲断-泥底辟混合型、逆冲型3种类型，提出研究区内的圈闭主要以构造-岩性圈闭为主，为尼日尔三角洲盆地深水勘探提供新的理论指导。  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献   

曲靖非相干散射雷达电离层F区日间电子温度变化特征初步分析   总被引：1，自引：0，他引：1       下载免费PDF全文

丁宗华  代连东  杨嵩  唐志美  吴健  许正文 《地球物理学报》2020,63(4):1282-1293

利用曲靖非相干散射雷达2017-2018年春夏季观测数据首次分析了电离层日间150~450km电子温度的地方时与高度变化特征及其与电子密度的相关性.发现hmF2及以上的电子温度在日出日落时具有两个峰值,在11∶00-16∶00LT之间变化较小,高度越高午后上升的时间越早;从150km开始迅速增加,在约220km达到最大值,然后开始降低,在约300~350km达到最小值,最后单调上升;200km以下电子温度与电子密度成正相关(主要由热传导控制),200~450km之间存在明显的反相关(光电离过程占主导),电子-离子温度差与电子密度对数之间存在近似线性关系,电子温度逐日变化与光电离因子的变化趋势相似,这种相关性在中午与午后更明显;以上结果与其他非相干散射雷达观测和电离层模型计算结果基本一致,但也存在一些差别,需要结合更多数据深入分析.  相似文献   

大规模群桩基础水平承载力效应系数计算研究          下载免费PDF全文

贾鹏  王兰民  杨燕  刘上春 《地震工程学报》2020,42(5):1202-1207

桩基础在水平荷载或地震作用下的承载力计算一直是工程界的一个研究难点，近年来随着建筑、桥梁桩基础的规模大幅增加，基于小规模、小比例尺群桩基础水平承载力试验得出来的结论和计算方法可能会不适应新的计算要求，相关的认识和计算方法需要重新论证和更新。本文针对大规模群桩基础水平承载力效应系数的计算问题，首先对国内外研究进展进行调研，发现现有的规范计算方法可能会高估群桩基础的水平承载力。针对这些问题，对大规模群桩基础的水平承载力效应系数进行有限元数值计算分析，探讨水平承载力效应系数的规律，给出相应的计算方法，并与规范计算方法结果进行对比。本文的研究结果可为相应的工程设计问题提供依据，结果的适用性需要今后进一步的检验。  相似文献   

BDS卫星差分码偏差稳定性分析及其短期预报     

梅登奎  闻德保 《大地测量与地球动力学》2020,40(7):746-750

利用MGEX(multi-GNSS experiment)发布的BDS卫星差分码偏差(differential code bias, DCB)产品，比较分析不同太阳活动水平下BDS卫星DCB产品的稳定性变化特性，并采用差分自回归移动平均(auto-regressive integrated moving average, ARIMA)时间序列预测模型，实现不同太阳活动水平下BDS卫星DCB的短期预报。结果表明，在太阳活动高年，BDS卫星DCB日解值稳定度、月稳定性均明显低于太阳活动低年，且不同卫星星座类型的BDS卫星DCB稳定性也存在差异；ARIMA时间序列预报结果与MGEX发布值符合程度较好，优于多项式拟合法预测结果。  相似文献   

基于SLAF测序分析3个塔形马蹄螺群体的遗传结构和多样性*     

黄景  欧泽奎  刘文广  何毛贤 《热带海洋学报》2020,39(5):1-18

塔形马蹄螺(Tectus pyramis), 海洋软体动物, 广泛分布于中国深圳大鹏湾、海南岛、西沙和南沙群岛的珊瑚礁生态系统中。文章采用特异性位点扩增片段简化基因组测序技术(SLAF-seq)对来自深圳(SZ)、三亚(SY)和西沙(XS)的塔形马蹄螺群体的遗传多样性和结构进行分析。通过测序共获得115.74Mb读长数据, 平均测序深度为337.87倍, 测序质量值(Q₃₀)平均为94.07%。研究获得118679个多态性SLAF标签, 获得846502个高度一致的群体单核苷酸多态性位点(SNPs), 其中有155个显著差异SNPs。3个群体的平均观察杂合度(H_o)和期望杂合度(H_e)值分别为0.1441~0.1611和0.2537~0.2695。平均多态性信息含量(PIC)为0.2048~0.2176。通过系统发育树分析、主成分分析和聚类分析, 将45个个体大致分为3个类群, 每个群体的所有个体都可以聚类成一个类群。SZ和SY群体的遗传结构相似, 遗传距离最低(0.2510), 遗传分化系数F_st值最低(0.0818)。但XS与其他两个群体间的遗传分化明显, 尤其是XS和SZ群体(F_st=0.1868)。3个群体的遗传分化可能与海流和地理位置有关。  相似文献   

Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress     

Wenqian Dong  Xiuqing Hu  Hongtao Fu 《Marine Georesources & Geotechnology》2020,38(7):770-785

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.  相似文献